The Audibility Of the Improbable
  09.21.2009      
Post a comment
1 Posted by : William Meadows
Dec 11, 2009 5:15PM
REPLY
Your test procedure was flawed in precisely the same way as audiophile tests often are. If you know which set up you are listening to, you cannot fairly judge it. Your impression is biased by your knowledge. It is possible that a grossly undersized power cord could limit the current flowing into the power transformer, thereby affecting the voltage regulation on the DC side of the supply. You would know this was happening because the cord would heat up. If you have a sufficiently large gauge power cord, one that will not limit the current supply, then the power supply operates the way it was designed to. A properly designed power supply will have filter caps on the DC output that supply current for transient demand by the circuit. Here is the key point - the demands of the circuit are met by the output side of the power supply, NOT the AC mains. If the power supply is properly designed to handle the demands of the circuit, there is nothing you can do on the AC side to change the performance of the circuit. ESP's claim to affect midrange harshness or anything else in the sound is totally without physical basis.
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are made,
please login or register.
Post a comment
1 Posted by : William Meadows
Dec 11, 2009 5:15PM
REPLY
Your test procedure was flawed in precisely the same way as audiophile tests often are. If you know which set up you are listening to, you cannot fairly judge it. Your impression is biased by your knowledge. It is possible that a grossly undersized power cord could limit the current flowing into the power transformer, thereby affecting the voltage regulation on the DC side of the supply. You would know this was happening because the cord would heat up. If you have a sufficiently large gauge power cord, one that will not limit the current supply, then the power supply operates the way it was designed to. A properly designed power supply will have filter caps on the DC output that supply current for transient demand by the circuit. Here is the key point - the demands of the circuit are met by the output side of the power supply, NOT the AC mains. If the power supply is properly designed to handle the demands of the circuit, there is nothing you can do on the AC side to change the performance of the circuit. ESP's claim to affect midrange harshness or anything else in the sound is totally without physical basis.
Post New Comment
If you are already a member, or would like to receive email alerts as new comments are made,
please login or register.


© 2012 NewBay Media, LLC. 28 East 28th Street, 12th Floor, New York, NY 10016 T (212) 378-0400 F (212) 378-0470

Use of this website is subject to its Terms of Use | Privacy Policy



NewBay Media's market leading brands are centered on five vertical markets -- Pro Audio, Broadcast and Video, Musical Instruments, AV / Consumer Electronics and K-12 Education.
NewBay publishes and produces over 40 publications and show dailies, 50 websites, 30 daily and weekly E-Newsletters, 3 expos and over 50 custom publishing efforts annually.