Berkeley, CA (August 2, 2004)–Meyer Sound Laboratories has begun shipping its self-powered MILO 120 high-power, expanded-coverage, curvilinear array loudspeaker, a variation on the standard MILO.
The MILO 120 provides 120 degrees of horizontal and 20 degrees of vertical coverage and is intended for situations requiring curvilinear arrays with wide horizontal and vertical coverage. Lower-profile arrays of MILO 120 can be built with only a few elements. MILO 120 is optimized for the shorter throws and lower SPL of down-fill applications, and is designed to be the down-fill complement to standard MILO or M3D line-array cabinets, as well as performing well in other fill applications that can be satisfied by one or two cabinets.
The MILO 120 low/low-mid frequency section comprises two neodymium magnet 12-inch drivers with 4-inch voice coils in a 2-way arrangement in which an integral crossover rolls off one driver above 150 Hz to maintain optimal polar and frequency response. The mid-high section (560 Hz to 4.2 kHz) uses a 1.5-inch exit, 4-inch diaphragm compression driver coupled to a 120-degree constant directivity horn through Meyer Sound’s patented REM ribbon emulation manifold. A dedicated very-high frequency section, with extended range to 18 kHz, employs two 0.75-inch exit, 2-inch diaphragm compression drivers coupled via a second REM to an additional 120-degree horn.