Charlotte, NC (October 2, 2007)–At the NAB Radio Show, the National Radio Systems Committee (NRSC)–a technical standards-setting body co-sponsored by the National Association of Broadcasters (NAB) and the Consumer Electronics Association (CEA)–adopted two NRSC Guidelines and two newly revised NRSC Standards and retired an AM radio receiver standard.
The AM Broadcasting (AMB) Subcommittee adopted the first-ever NRSC Guideline, NRSC-G100, Bandwidth Options for Analog AM Broadcasters. This document is a guideline for broadcasters who desire to operate their AM facilities with audio bandwidths below 10 kHz, and offers a thorough explanation of why reduced AM bandwidth may be advantageous.
The AMB Subcommittee also adopted NRSC-1-A, NRSC AM Preemphasis/deemphasis and Broadcast Audio Transmission Bandwidth Specifications, and NRSC-2-A, Emission Limitation for AM Broadcast Transmission. These are revisions to previously adopted NRSC Standards, as a result of the NRSC’s periodic Standards review process. NRSC-3, Audio Bandwidth and Distortion Recommendations for AM Broadcast Receivers, was retired because it has not been widely adopted.
NRSC-G200, Harmonization of RDS and IBOC Program Service Data (PSD) Guideline, was adopted by the Digital Radio Broadcasting (DRB) Subcommittee. This Guideline discusses specific text message features of the NRSC’s in-band/on-channel (IBOC) digital radio (NRSC-5-A) and RBDS (NRSC-4-A) Standards, and defines an intended usage that will allow broadcasters to send, and receivers to display, common information independent of whether the data signal is being received from IBOC or RDS.
These documents will be available free-of-charge on the NRSC’s web site at following a final, procedural review, which will take approximately four weeks. Additional information about the NRSC, including information on becoming a member, is also available on the web site.
National Radio Systems Committee