Washington, D.C. (July 16, 2012)—The historic, 600-seat Howard Theater, neglected since the early 1980s, recently underwent a massive restoration which included a new audio system designed by contracting firm Peltrix (New York), which installed two Yamaha PM5D-RH digital consoles, one at front of house and one at the monitor position.
Peltrix owner, Amit Peleg, was brought in to replace another designer in August 2009. The building design plans were at 30 percent completion at the time but it was early enough to allow Peltrix to do what was needed in the design stage. It took two and a half years from the point Peltrix was brought in to completion of the theater’s overhaul. In addition to the design, the Company was responsible for the integration and installation of the AV system along with assisting the new owners to hire and train production staff.
“We were recommended by the Bensusan Group who are the operators of the Howard Theater, since we’d worked for them at other venues in the past, such as the Blue Note and BB King’s in New York,” states Peleg. “Since we are very familiar with their type of business and style of operation, it made communication with the Howard Theater Restoration developers easier.“
Peleg said the building was completely gutted, and the outer walls were supported externally while a basement was dug and new foundation was put in. This allowed Peltrix to fit a completely modern system into a historical building that originally was never meant for amplified music. “I actually set the requirements which were based on my experience working with the operators on their other venues,” says Peleg.
The philosophy behind this installation, Peleg said, was to put in a system that is rider-friendly and flexible since the space is used for many styles and genres of music, along with private parties and corporate events. “We needed a system that could accommodate anything thrown at it without the need for modifications, augmentation or replacement of gear on a per-show basis, he notes. We went the extra mile to design a very flexible wiring scheme that allows patching of any kind of signal anywhere in the building and everywhere on stage along with preparation for expansion for a recording studio planned in the near future. The Yamaha PM5D-RH consoles were the most logical fit for this kind of setup. We are running the consoles at 96k using a Big Ben external clock that gives us superior sound quality. Signal path is all AES/96k from the console to the DSP and through to the amps.”
In addition to the Yamaha consoles, Peltrix installed a JBL speaker system and a new video system consisting of Da-Lite projection screens, Samsung and Sharp LCDs, Sanyo projectors, Vaddio cameras, and an Elation LED screen.
Yamaha Commercial Audio Systems, Inc.