ATC Bows P2 PRO Dual Mono Amplifier - ProSoundNetwork.com

ATC Bows P2 PRO Dual Mono Amplifier

ATC will release its P2 PRO Dual Mono Power Amplifier in early November.
Author:
Publish date:

New York, NY (October 27, 2016)—ATC will release its P2 PRO Dual Mono Power Amplifier in early November.

Hand-built by ATC in the UK, the Class A/B P2 PRO Dual Mono Power Amplifier is a dual mono design, keeping the power supplies, signal, and return paths discrete in an effort to achieve maximum signal separation with minimal crosstalk. It also means that the power delivery from one channel cannot affect the specified power available from the other.

Within a new low-vibration 19-inch rack-mount chassis design featuring a precision machined 12.7mm brushed aluminum front panel, the P2 PRO Dual Mono Power Amplifier’s layout includes a custom-made 400 VA low-noise transformer for each channel and an output stage involving three pairs of MOSFET devices per channel to achieve peak current output of over 15 amps.

Gain matches that of the P2 PRO Dual Mono Power Amplifier’s lower power P1 PRO Dual Mono Power Amplifier sibling so that they can be used together in passive bi-amp or tri-amp systems connected via ‘Link’ phono inputs/outputs.

The P2 PRO Dual Mono Power Amplifier offers both balanced XLR and unbalanced phono inputs, ‘Link’ phonos, proprietary speaker terminals, and a front panel-mounted power switch.

Weighing 21kg/46.2lbs, the P2 PRO Dual Mono Power Amplifier features a 300 W (8Ω, 1% THD) maximum continuous output power rating; 2 V rms (ref. 150 W out) input sensitivity; 10kΩ/leg input impedance; <2 Hz - >400 kHz (-3 dB) frequency response; >100 dB crosstalk; and >0.002%/-95 dB THD.

Transaudio Group(ATC U.S. Distributor)
http://www.transaudiogroup.com

ATC
www.atcloudspeakers.co.uk/professional