Clear-Com Bows DX410 Wireless Intercom

Clear-Com has launched its DX410 Wireless Intercom system, a two channel 2.4GHz digital wireless system with 7 KHz wide band audio supporting lightweight beltpacks and All-in-One wireless headsets.
Author:
Updated:
Original:

Alameda, CA (September 14, 2015)—Clear-Com has launched its DX410 Wireless Intercom system, a two channel 2.4GHz digital wireless system with 7 KHz wide band audio supporting lightweight beltpacks and All-in-One wireless headsets.

Image placeholder title

The first DX Series system to offer 7 KHz wideband audio, the DX410 also features 2-wire and 4-wire bridging and 2-wire auto-nulling. The bridging capability allows the option for combining the 2-wire and 4-wire ports together on either channel A or B, allowing operators to use a 4-wire out to send all the audio to a mixer, matrix intercom or other audio source. 2-wire auto-nulling enables integration with Clear-Com or TW wired partyline systems.

The BP410 wireless beltpack and WH410 All-In-One wireless intercom headset offer extended battery life of up to 12 hours use on the 410 beltpack and All-in-One headset. Each DX410 base station can support up to 15 registered BP410 wireless beltpacks and/or WH410 All-in-One wireless headsets. In a single-channel operation, any four beltpack users can engage in simultaneous, full-duplex (talk-listen) communication, while three users may be in full-duplex mode in a dual-channel operation.

Operating in the 2.4GHz band means that DX410 does not require radio licensing for use. DX410 is a frequency hopping system (FHSS), and offers spectrum-friendly and AFH (Adaptive Frequency Hopping) modes, in order to avoid interference with WiFi.

Clear-Com
www.clearcom.com