Fort Lauderdale, FL (September 29, 2017)—Ferrofish has expanded its Dante Verto Series to offer the Verto 32, Verto 64 and Verto MX converters, integrating digital ADAT and MADI audio formats into a Dante environment.
The Verto 32 and Verto 64 offer ADAT, while the Verto MX supports both BNC and OPTICAL MADI and can be Single or Multimode MADI due to the use of an optional Single Mode MADI Module. All three devices provide word clock I/O for external synchronization and can be controlled remotely via the Dante network.
The Verto Series can be used alongside other Ferrofish interfaces as well as other converter brands via the ADAT or MADI I/O. If all devices are connected via MIDI, the Verto converts all Dante audio streams to ADAT or MADI and the control commands sent over Dante into MIDI remote control messages. The Verto MX offers an additional feature — instead of a separate MIDI Port, the MIDI messages are extracted from the MIDI-over-MADI port.
In terms of sampling frequencies, the Verto 32 and 64 models range from 44.1 kHz–96 kHz, while the Verto MX supports frequencies from 44.1 kHz–192 kHz. The channel count varies with each model depending on the sampling frequency selected: The Verto 32 supports 32 1/O channels at 48 kHz or 16 I/O channels at 96 KHz, while the Verto 64 supports 64 I/O channels at 48 kHz or 32 I/O channels at 96 kHz. The Verto MX supports 64 I/O channels at 48 kHz, 32 I/O channels at 96 kHz or 16 I/O channels at 192 kHz.