Council Bluffs, IA (Novemeber 2, 2012)—Grundorf has released its new Tour 8 Series Snake Racks.
Available in 12-, 16-, 18- and 20-space configurations, the Tour 8 Series Snake Racks are designed with an aim at helping touring musicians and audio professionals with the load-in and tear down of a project. In addition to holding a rack-mountable snake box, the cases also have a compartment on the utility side of the enclosure to house the snake reel.
The Tour 8 Series Snake Racks include a pass-through between the rack and utility sections of the case so the feeder cable can remain connected. For added protection, there is a cable port located at the rear of the enclosure that enables the top lid to remain attached while the system is in use.
Designed and manufactured in the USA, Grundorf’s new Tour 8 Series Snake Racks are constructed using 3/8-inch multi-layer plywood with an ABS laminated finish. The edges are finished with a double-edged aluminum extrusion and the lid-to-body seal is made with an interlocking aluminum tongue and groove valance system. The snake rack incorporates 12 rivet point recessed handles and 10 rivet point recessed catches; the handles and catches all use a steel washer-backed rivet system.
The Tour 8 Series Snake Racks employ a large, heavy duty dolly outfitted with 4-inch casters and two brakes. Optional recessed key locks are available. The Tour 8 Series Snake Racks are available in red, black, blue, and gray.