Waterford, MI (August 8, 2012)—ISP Technologies has expanded its High Definition Distributed System (HDDS) with the introduction of the 2-way active SM2110 speaker.
The HDDS is a system utilizing ceiling or wall-mount speakers that can be linked via Cat5 or Cat6 cable. Five models of speakers are available: the SB400 subwoofer; the CS 650 ceiling mount with plenum; CS 651 with back can;and two stand-alone wall mount versions—the SM 650 and SM2110.
The heart of the HDDS is its Master Control Module which can power and control multiple zones and can connect up to 180 speakers without the need for 70 volt transformers. The speakers are self-powered and receive a line level signal, so power attenuators for remote control are not required
The SM2110 is a 220-watt, self-powered speaker that receives line level signal over dual Cat6 cables from a remote HDDS Master Control Module. It is capable of 122 peak dB output over an operating frequency range of 42 Hz – 20 kHz, with a nominal coverage angle of 80 degree horizontal x 70 degree vertical. It contains a 10” cone speaker and a 1.3” titanium diaphragm compression driver with a 4th order LR high pass and low pass crossover, and a switchable high pass filter of 40 Hz or 90 Hz for use with a HDDS SB400 subwoofer.