Rio Rancho, NM (November 30, 2016)—Lectrosonics has announced the immediate availability of its SRAES3 bottom plate adapter for all SR Series dual-channel slot receivers, including the SRc, SRb, SRa and SR, and the 5P variants of these units.
The SRAES3 will work with all SR receiver versions to provide audio in the following formats: AES3 digital audio at 48 kHz sampling with an internal clock; AES3 digital audio with an external word clock at 44.1, 48 or 96 kHz sampling; and balanced analog audio from -50 dBu to +5dBu in 1 dB steps.
One or two channels of digital audio are delivered from the CH1 jack, while the CH2 jack delivers analog audio at all times.
The standard multi-pin interface and mounting holes are the same on all SR Series receiver output adapters. External word clock can be fed to the SRAES3 via the BNC connector. A 75-ohm termination of the word clock connection is applied by a field-changeable jumper, installed by default at the factory. The housing is machined from a solid aluminum billet and hard anodized.
The SRAES3 is available now at $450 MSRP.