Costa Mesa, CA (May 6, 2013)—QSC Audio Products has added three loudspeakers—the S8T, S10T and S12—to its AcousticDesign Series line of surface mount loudspeakers. The speakers will be available starting in June 2013.
Designed for a variety of foreground/background sound reinforcement applications, these new models feature both constant voltage (70/100V) and low impedance operating modes.
The patent pending X-Mount (included with every loudspeaker) enables the loudspeakers to be deployed either vertically or horizontally from a flat surface. Knurled surfaces on the X-Mount’s pivot points allow the loudspeaker deployment angle to lock in place in 7.5-degree increments. Pan, tilt and yaw adjustments allow the loudspeakers to be positioned to minimize impact on any interior or venue sight lines. To complete the installation, integrators lift the loudspeaker onto the mount and it automatically locks it into place.
If a mounting solution other than the included X-Mount is required, all models include M10 mounting points for suspension via eye-bolts as well as mounting points for an optional yoke mount bracket. Also, Euroblock connectors enable installers to pre-wire the system and terminate connections prior to the final installation of the loudspeaker.
The AcousticDesign S8T, S10T and S12 loudspeakers also incorporate Directivity Matched Transition, QSC’s acoustic design approach that matches the coverage angle of compression driver to the coverage angle of the woofer at the crossover point.
The weather resistant (IP-54) AcousticDesign S8T, S10T and S12 enclosures are constructed from rugged ABS and include a seismic mount molded into the enclosure for added safety.
QSC Audio Products