Vancouver, Canada (July 18, 2017)—Radial Engineering has shipped its highly anticipated DiNETDAN-TX and DAN-RX stereo Dante-enabled direct boxes.
The DAN-TX and DAN-RX allow users to send or receive two channels of analog audio over a digital Dante-enabled network. The DAN-TX includes 1/4″, RCA and 3.5 mm inputs, with a single Ethernet output that can connect any analog device to a Dante network. Mono instruments are provided a thru connection for a stage amp, and includes a trim control that provides +/-10 dB of gain. Balanced signal levels up to +24 dB can reportedly be accepted without distortion, and a high pass filter and -20 dB pad can be engaged when required.
The DAN-RX is a two-channel Dante receiver that can output balanced analog audio at any point on a Dante network. The unit features dual XLR outputs and a 3.5 mm headphone output with level control. The DAN-RX connects to the network via a single Ethernet cable, and ground lift is provided on the outputs.
Both the DAN-RX and DAN-TX are built with 14-gauge steel construction and employ 24-bit / 96 kHz converters. Power for each device can be supplied with a 15V adaptor (included) or via Power over Ethernet (PoE), and both power sources can be used simultaneously for redundancy.
Radial Engineering Ltd.