Greensboro, NC (December 1, 2014)—WorxAudio Technologies has released its XL3i (installation) and XL3T (touring) line array systems. Added to the TrueLine Series, the new XL3i/XL3T modules create a 38-degree vertical system with a reported horizontal dispersion of 150 degrees.
The XL3i and XL3T line array systems incorporate three modules, each with a large-format compression driver with a 3-inch diaphragm and 1.4-inch exit coupled to a stabilized proprietary FlatWave Former waveshaping device. The compression drivers are paired with dual 8-inch cone transducers coupled to the Acoustic Intergrading Module (A.I.M.) in an effort to minimize comb filtering and offer a 55 Hz to 20 kHz frequency range.
XL3i and XL3T enclosures are made of multi-ply Baltic birch, covered by a multi-layered, two-part, polyurea ProTex finish, available in black or white. A 14-gauge, perforated, cloth-backed, powder-coated steel grill protects the front.
The system’s included EASE Focus aiming software incorporates all critical parameters, including weight, distribution, and rigging points, and provides a single-step “Auto Focus” process intended to provide the optimum angle at which to suspend the enclosure using custom-designed TrueAim flyware.
WorxAudio Technologies’ PMD-2580 digital power amp is designed expressly for XL3i and XL3T loudspeaker systems. Housed in the rear of the enclosure, it features 2,500 watts for the low frequencies and 800 watts for the highs. It provides twin digital program processors, a mute switch for each output, detented volume control, an XLR transformer with isolated I/O, and industry-standard AC PowerCon switchgear I/O.