Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now


Camco D-Power Series

Power amp range

What is it?A range of six 2-channel models from Camco’s D-Power series suitable for live sound, installation and theatre applications. DetailsThe D7/D4/D3/D2 models utilise a hybrid Class-H amplifier engine with power outputs ranging from 1000W up to 3300W per channel, while the D05 and D1 versions employ Camco’s new UMAC Class-D technology, delivering 250W and 500W per channel, respectively. All models are said to offer smooth and responsive handling throughout the power range, benefitting from the latest advances in SMPS technology and light weight across a broad range of professional applications. D-Power output specifications have been select to allow each model to operate as a stand-alone amplifier or in combination with Q-Power series models so that exact power formats can be matched – minimising rack space and maintaining overall function and design.
 Frequency response across the entire range is quoted as 20Hz – 20kHz (+/- 0.2dB) and THD+N at <0.01% (typical). A-weighted signal-to-noise ratio is >113dB (D05, D1), 115dB (DP2, DP3, DP4) and 110dB (DP7). All models can feed 4, 8 and 16 ohms loads and the Class-H models can also operate down to 2 ohms. Peak limiting circuitry is included across the range (3-step switchable on the Class-H models) – as is the broad range of protection features which include inrush-current limitation, power on/off transients, temperature, output DC and “intelligent” fuse protection. LEDs are included for power on, signal, protect, clip and output current indication. And another thing…All the amplifiers in the range can be operated in bridge mode for significantly increased power output into 8 – 16 ohm loads and 2 – 16 ohm loads (Class-H models).